TRANSFORMER TANK ACCESSORIES

The pressure is relieved by allowing the pressurised fluid to flow from an auxiliary passage out of the system. The relief valve is designed or set to open at a predetermined set pressure to protect pressure vessels and other equipment from being subjected to pressures that exceed their design limits.

• Item Code: SHINE34562

• We are manufacturing Corrugated Wall Panels from CRCA Steel Sheets in thickness ranging between 1.2 to 1.4 mm.
• Corrugated Wall Panels are formed in length ranging from 500 to 1100 mm, with depth of 50 to 400 mm and pitch of 40 to 60mm.
• The Corrugated Tanks are constructed using Mild Steel Sheets/Plates in thickness ranging between 3 mm to 10 mm.

 Advantage :

• Compact in size.
• Saving in Steel/Reduction in weight of transformer tanks.
• Saving in oil. Additional reduction in oil volume because of more stability in corrugation (no bulging of corrugation).
• Saving Freight cost.
• Improve heat dissipation.
• Oil cleaning easier and less expensive.
• Elegant appearance and Hermetically sealed construction.
• Due to vertical oil channel greater stability is achieved in comparison with the old system. It means tanks can withstand a higher degree of pressure .

• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: wodden box

we manufacture, supply and export wide array of Corrugated Tank Transformers that are available in different capacities and are functionally efficient in nature. Owing to its exceptional features these products are utilized in varied industrial applications. They are thermostatically balanced and have high mechanical strength.

• We are manufacturing Corrugated Wall Panels from CRCA Steel Sheets in thickness ranging between 1.2 to 1.4 mm.
• Corrugated Wall Panels are formed in length ranging from 500 to 1100 mm, with depth of 50 to 400 mm and pitch of 40 to 60mm.
• The Corrugated Tanks are constructed using Mild Steel Sheets/Plates in thickness ranging between 3 mm to 10 mm.

• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

Our transformer radiator valves DIN 42560 type A and A OR are designed to be welded onto the transformer wall or on connection pipes. The radiator will be flanged on the four M16 holes (PCD=160). The housing of the radiator valve is made of forged steel S355J2G3 and thus not subject to any leakage as it may occur with casted housing.

TECHNICAL SPECIFICATIONS

•Fabricated from high quality aluminium alloy to DIN 1725 and powder coated for corrosion resistance.
•Cylinder and oil cup is made from special grade of polycarbonate that resist transformer oils, UV light, corrosive atmospheres and tropical and marine climates. These are unbreakable & uv stabilized.
•Special grades Nitrile gasket to ensure waterproof and air tight joints
•Special protection over polycarbonate cylinder is available in the form of aluminum wire mesh or S.S./Alu. Perforated sheet as per customer's request.

• Item Code: SHINE43568
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS

Pressure Relief Device Valves for Transformers Transformer pressure relief device valve for liquid-immersed transformers open in case of an internal fault and guarantee that the occured overpressure can properly release. Pressure relief device valves for transformers close with decreasing pressure back to completely closed and leaktight position. Pressure relief device valves for transformers can be installed in any position or inclination on the cover or the wall of a transformer. Upon request a transformer can be equipped with several pressure relief valves. The pressure relief valves are tested for operating pressure. We offer either pressure relief device valve PRD with thread connection G1", G1 1/2" or G2" or for larger applications, we additionally offer transformer pressure relief valve MPRV which can be equipped with electrical contacts.

• Item Code: SHINE8727
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

As the leading supplier in the concerned field, we offer a quality grade of Silica Gel Breather. Our provided gel is processed by using the best quality chemical compounds and advanced technology in line with industry norms. Used for preserving items, which get easily destroyed by moisture that allows growth of spoilage and mold, this gel is highly appreciated in the market. Clients can avail this gel from us at nominal prices.Features:

• Soluble in water
• Stable in different temperature
• Accurate composition

• Item Code: SHINE12090710
• Production Capacity: 100000
• Delivery Time: 30 DAYS

Oil Level Indicators for Transformers Our oil level indicators for transformers are used for hermetically sealed and for distribution transformers with expansion tank. They are suitable for indoor and outdoor use.   The oil level indicator displays if air bubbles have remained in the transformer, if gas has been generated because of an internal failure or if there is a leakage at the transformer tank. Depending on the oil level indicator type, the oil level can be displayed either directly or by means of a leakage-proof magnetic clutch. We have types with vertical float movement for the use on transformer covers or types for the horizontal use at expansion tanks in program. Float movement of the oil level gauges for power transformers as well distribution transformers with expansion tank can be either radial or axially chosen.

• Item Code: 53254FG
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

Oil Level Indicators for Transformers Our oil level indicators for transformers are used for hermetically sealed and for distribution transformers with expansion tank. They are suitable for indoor and outdoor use. The oil level indicator displays if air bubbles have remained in the transformer, if gas has been generated because of an internal failure or if there is a leakage at the transformer tank. Depending on the oil level indicator type, the oil level can be displayed either directly or by means of a leakage-proof magnetic clutch. We have types with vertical float movement for the use on transformer covers or types for the horizontal use at expansion tanks in program. Float movement of the oil level gauges for power transformers as well distribution transformers with expansion tank can be either radial or axially chosen.As may be aware that the transformer oil is usually colorless and little difficult to see without the help of oil level gauge.  A crystal clear optical rod flat type or circular type with normal atmospheric light provides a positive indication of oil level in the conservator tank of a transformer. The rod has a prismatic cone at the tip with a red indicator in the centre of the cone.  When the oil level is above the cone, the gauge is black and when the oil level is below the cone, the gauge window is red.   With light falling on the gauge window regardless of the color of the transformer oil will indicate either black or red to ascertain the level of the oil in the conservator tank. The Prismatic Oil level gauge fixed on the side of the conservator tank with a small glass window visible.  Due to expansion and contraction of oil in the conservator tank the oil level goes up or down which is visible through the glass window provided in Prismatic type oil level gauge.  This is normally used for smaller distribution transformers.

• Item Code: 4RS64FGU6
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

I. Scope: This specification covers the characteristics required for Mgt Cobs used (or daawin o of the core In manufacturing of mkt transformers. This rpecikation along with the designer's data sheet HO constitute purchase specification. My specific requirements other than material Specification shall be mentioned m the designers One sheet.
ILSchedule of Characteristics: The Material used for malting nem hats should be of Chromium mcisbdenum steel (40M6C44M03) and should be Mat treated. The TNe Bolt used for come clamping must to painted with (posy paint. The surface of the TO/mega should be dun blasted end painted except at threaded portion.
a. Chemical Composition of Chromium MOrptdeflion Steel
51.163 Element Percentage I Carbon 035 to OAS% 2 511kOn 0.10100.3$% 3 Manganese 040 to 030% 4 Nickel 1.2510 1. 75% S Chromium 0.90 to 1.30% 6 Molybdenum 02 to 0.35 %
b. ethenksi Properties:
SLNo Chara0eriSks TIMPIrtinent 1 Tensile Stterigth049M nr 190 tO 1140 2 0.2 ft hoc4 Suess (ISPH HIM 750 3 13001004 Pertentlete CL 5.6S ,./A 13 4 lead Inge. Value (Suit min) 48 5 Brinell Hardness 018a 215 to 341 6 Limiting Ruling Section (aura 100

• Item Code: UTER5
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 3000000
• Delivery Time: 30 DAYS
• Packaging Details: WOODEN BOX

I. Scope: This specification covers the characteristics required for Mgt Cobs used (or daawin o of the core In manufacturing of mkt transformers. This rpecikation along with the designer's data sheet HO constitute purchase specification. My specific requirements other than material Specification shall be mentioned m the designers One sheet.
ILSchedule of Characteristics: The Material used for malting nem hats should be of Chromium mcisbdenum steel (40M6C44M03) and should be Mat treated. The TNe Bolt used for come clamping must to painted with (posy paint. The surface of the TO/mega should be dun blasted end painted except at threaded portion.
a. Chemical Composition of Chromium MOrptdeflion Steel
51.163 Element Percentage I Carbon 035 to OAS% 2 511kOn 0.10100.3$% 3 Manganese 040 to 030% 4 Nickel 1.2510 1. 75% S Chromium 0.90 to 1.30% 6 Molybdenum 02 to 0.35 %
b. ethenksi Properties:
SLNo Chara0eriSks TIMPIrtinent 1 Tensile Stterigth049M nr 190 tO 1140 2 0.2 ft hoc4 Suess (ISPH HIM 750 3 13001004 Pertentlete CL 5.6S ,./A 13 4 lead Inge. Value (Suit min) 48 5 Brinell Hardness 018a 215 to 341 6 Limiting Ruling Section (aura 100

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WOODEN BOX

Radiator valvesfor transformers are used in pipelines of oil-immersed power transformers or reactor fittings. The radiator valves enable a replacement of components without the necessity of removing any insulating liquid. The main advantage compared to other valves is the compact and cost-efficient construction. Our valves are designed in accordance with EN 50216-8 (DIN 42560).

The dehydrating breather removes practically all moisturefrom the air which flows through it into the conservator when the transformer is cooling down. This has the effect of largelypreventing any reduction of the dielectric strengthof the insulation due to moist ambient air and anyformationof condensation in the conservator. Thus the dehydratingbreather increases the operational integrity of the transformer.Due to our policy of continuous product improvement, dimensions and designs are subject to change.DIN 42567 150 gr.Working principleThe dehydrating breather removes practically all moisturefrom the air which flows through it into the conservator when the transformer is cooling down. This has the effect of largelypreventing any reduction of the dielectric strengthof the insulation due to moist ambient air and anyformationof condensation in the conservator. Thus the dehydratingbreather increases the operational integrity of the transformer.Top caseCylinder Oil bowlGasket PlugInjected aluminium RAL 7033PolicarbonatePolicarbonateNitrile rubberPolyethylene

Galvanized Arcing Horn in High Voltage Insulated Pole Line Hardware/Electric Arcing Horn

 ARCING HORNS used to protect insulators on high voltage electric power transmission systems from damage during flashover

Transformer tie rods, which are extensively used by the clients, located across indian subcontinent. These products are widely acknowledged by the clients for their optimum capability of carrying tensile loads. The range is widely appreciated by the clients for their various features including corrosion resistance, abrasion resistance, longer functional life and high reliability. Owing to the superior quality, this range finds its application in various steel structures such as:  

• bridges
• industrial buildings
• tanks
• towers
• cranes

• Item Code: SHINE34235

Dehydrating Breathers for Transformers Transformer dehydrating breathers are being used for liquid immersed transformers in order to protect the insulating liquid and prevent the harmful moisture absorption from ambient air, which occurs when the load on the transformer fluctuates.The transformer dehydrating breather removes practically all moisture from the air that flows through it into the conservator when the transformer is cooling down. This largely prevents any reduction of the dielectric strength and the formation of condensation in the expansion tank. Thus, the dehydrating breathers increases the operational safety of transformers.

Our dehydrating breathers are either screwed to the transformer or appropriated by a flange. We offer a variety of different breather types

• Item Code: SHINE2348543
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS

The dehydrating breather removes practically all moisturefrom the air which flows through it into the conservator when the transformer is cooling down. This has the effect of largelypreventing any reduction of the dielectric strengthof the insulation due to moist ambient air and anyformationof condensation in the conservator. Thus the dehydratingbreather increases the operational integrity of the transformer.The Dehydrating breather is availible for 1 kg and½ kg fillingcapacity. DIN 42567 Form B and Form C can also be manufactured as the customer request.
NO1234567891011121314DESCRIPTIONTop sectionBottom sectionOil bowlHolderSleveGlass cylinderBridging plugGasketGasketPlugNutSpring washerRivetPin

Low Voltage Bushing
A simple non-condenser bushing for low voltage and medium voltage applications may be a rod of conducting material inserted into a porcelain tube. This has a central current-carrying bolt, usually of copper, and the insulation is provided by a combination of the porcelain shell and the transformer oil.

We offers a wide portfolio of porcelain bushings for low voltage and medium voltage applications, including connecting flags for the insulators.
Why WE ?

• More than 100 years of experience in manufacturing transformer components
• Comprehensive offering for distribution and power transformers
• Strong knowledge of the transformer business
• Supplier to customers all over the world
• One-stop-shop supplier for transformer components and insulation

• Item Code: SHINE2348
• Port of Dispatch: PATPARGANJ NEW DELHI
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX PACKING

Arcing Horn Type ZH

1.High grip strength
2.Easy installation
3.Fastest delivery
4.50-year experience Arcing Horn Type ZH
1)High quality of the Performed Armour Rods2)Stable structure
3)Certificate: ISO90014)Prompt quote & Leadtime guarantee5).Reduce the static stress of fiber optic cable6). Improve the anti-vibration ability of optical cable7). Inhibite the dynamic stress of wind vibration8).higher Safety performance

Materials Steel Parts available in stainless or mild steel mild steel parts are cadmium or zinc plated galvanizing upon request. Polyamide Parts Nylon 66 / superior mechanical properties against all acting forces / strong against UV lights Aluminium Parts GAISi12(Cu) Brass Parts CuZn40Pb2 (CW617N) / F34 DIN 17 673 Copper Parts E - Cu F25 DIN 40 500 Insulator Parts Paper phenol - plastic resin based laminates / HP 2061.5 class of DIN 7735 Transformer Cover Thickness 10 mm - 4 mm (6 spacer rings with each 1 mm) Current 30 A Upon Request aluminum parts protected by anodic oxidation mild steel parts supplied in stainless steel brass and copper parts are either tin-, silver- or cadmium-plated

• Item Code: SHINE9217
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

The Thermometer Pocket Type A1 is designed to be welded in the top cover of oil immersed transformers. The case 1 DIN 42554 is manufactured out of one metal piece (deep drawing process). This guarantees absolute oil-tightness. The Bimetal Thermometer MBT with G 1" connection thread can be screwed into the thermometer pocket.
The Thermometer Pocket Type A1 corresponds to EN 50216-4: 2002 type A1.
Thermometerpocket is suitable with our Bimetal thermometer MBT.

• Item Code: SHINE2196
• Minimum Order Quantity: 100 Piece
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

I. Scope: This specification covers the characteristics required for Mgt Cobs used (or daawin o of the core In manufacturing of mkt transformers. This rpecikation along with the designer's data sheet HO constitute purchase specification. My specific requirements other than material Specification shall be mentioned m the designers One sheet.
ILSchedule of Characteristics: The Material used for malting nem hats should be of Chromium mcisbdenum steel (40M6C44M03) and should be Mat treated. The TNe Bolt used for come clamping must to painted with (posy paint. The surface of the TO/mega should be dun blasted end painted except at threaded portion.
a. Chemical Composition of Chromium MOrptdeflion Steel
51.163 Element Percentage I Carbon 035 to OAS% 2 511kOn 0.10100.3$% 3 Manganese 040 to 030% 4 Nickel 1.2510 1. 75% S Chromium 0.90 to 1.30% 6 Molybdenum 02 to 0.35 %
b. ethenksi Properties:
SLNo Chara0eriSks TIMPIrtinent 1 Tensile Stterigth049M nr 190 tO 1140 2 0.2 ft hoc4 Suess (ISPH HIM 750 3 13001004 Pertentlete CL 5.6S ,./A 13 4 lead Inge. Value (Suit min) 48 5 Brinell Hardness 018a 215 to 341 6 Limiting Ruling Section (aura 100

• Item Code: TUUTRW
• Minimum Order Quantity: 100000 Kilogram
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 100000
• Delivery Time: 30 DAYS
• Packaging Details: WODDEN BOX

Backed by our flourishing business processes, we are able to provide a superior quality range of Transformer Core Fixture. The offered parts are widely used in the assembling of transformers as a component. Our skilled technocrats only use premium quality raw material and pioneered technology, while manufacturing the offered frame parts. These parts are highly demanded in the market by our patrons owing to their robustness and accurate dimension. Moreover, these parts can be availed in a broad range of models according to the requirement of our patrons.

• Item Code: SE87404
• Production Capacity: 1000000
• Delivery Time: 30 DAYS

The closing piece for drain, (not with flattened shank screws) for the discharge of oil from pipes or radiators used. About the closing piece for ventilation (flattened shank screws) may be in the drain portion of air space occur and the refilling with oil, air can escape.

• Minimum Order Quantity: 2000 Piece

The closing piece for drain, (not with flattened shank screws) for the discharge of oil from pipes or radiators used. About the closing piece for ventilation (flattened shank screws) may be in the drain portion of air space occur and the refilling with oil, air can escape.

• Minimum Order Quantity: 5000 Piece

We are counted among the leading manufacturers, exporters and traders of the MIG Torch. These MIG torch are designed keeping in mind the standard of international level using optimum quality of raw material. Our precious customers can avail these MIG torches at reasonable prices for various specifications. Further, these MIG torches are extensively used by our customers for its cost efficiency and effective results.

Features:

• Quality tested
• Excellent service life
• Easy to operate

• Item Code: MIGT-001

AIR DEHYDRATING FLANGES AIR DRYER BLIND FLANGE

• Minimum Order Quantity: 10000 Piece

Backed by our flourishing business processes, we are able to provide a superior quality range of Transformer Core Fixture. The offered parts are widely used in the assembling of transformers as a component. Our skilled technocrats only use premium quality raw material and pioneered technology, while manufacturing the offered frame parts. These parts are highly demanded in the market by our patrons owing to their robustness and accurate dimension. Moreover, these parts can be availed in a broad range of models according to the requirement of our patrons.

• Minimum Order Quantity: 100000 Piece